Panel & Rear
DSP Control Panels
SR-WP-BT44
4 × 4 Dante and Bluetooth wall panel — audio and power over one network cable.
A conversion transmission panel supporting a 4 × 4 Dante audio interface, a 2 × 2 Bluetooth interface and analogue RCA or TRS connections. PoE carries both audio and power over a single network cable, avoiding ground loops and simplifying installation. Bluetooth audio is converted to Dante digital audio for reliable network transport.
4×4
Dante
2×2
Bluetooth
BT 5.0
Wireless
PoE
Power & Audio
Fanless
Silent
Features
01
One-button pairing
Pairs with phones, tablets and computers, with LED indication of connection status.
02
Bluetooth to Dante
Converts Bluetooth audio into Dante digital audio for reliable network-based transmission.
03
Analogue too
Two RCA inputs and a 3.5mm TRS stereo input (TRS priority), plus a TRS stereo output.
04
Install-friendly
PoE power, standard RJ45 gigabit interface, fanless operation and a low-profile enclosure.
Specifications
| Dante interface | 4 × 4 |
| Bluetooth interface | 2 × 2, BT 5.0 |
| Analogue input | RCA × 2 or 3.5mm TRS × 1 (TRS priority) |
| Analogue output | 3.5mm TRS × 1 stereo |
| Network interface | Standard RJ45 gigabit Ethernet |
| Power | PoE — power and audio over one network cable |
| Conference function | Bluetooth call bridge |
| Configuration | Web interface or dedicated software; Dante Controller compatible |
| Firmware | Upgradeable over Ethernet |
| Protection | Over-voltage, over-current and electrostatic discharge |
| Cooling | Fanless, silent operation |
| Mounting | Wall, under-table or rack with optional accessories |
The source data sheet lists features only; no dimensional or electrical table is published. All figures are nominal, per manufacturer data.
Applications