Ceiling Speaker
IP PA System
SR-IPPAA-CS6
6″ PoE ceiling speaker — amplifier, decoder and driver on one network cable.
A Power-over-Ethernet ceiling speaker with a 6-watt Class-D amplifier module built in. A single CAT5 or CAT6 cable carries control, audio and power, so no AC or DC supply is needed at the speaker and layout costs fall. As a VoIP mass notification endpoint it supports network-controlled volume, scheduled broadcast, priority-based multicast streaming, zone grouping and status supervision.
6 W
RMS Output
802.3af/at
PoE
92 dB
Sensitivity
166 mm
Cut-Out
DHCP
Auto Address
Features
01
One cable does everything
Control data, audio and power all travel over a single CAT5 or CAT6 run.
02
Works on existing networks
Compatible with universal PoE switches and existing LAN, WAN and fibre infrastructure.
03
Zones and priorities
Speakers group into zones, with paging prioritisation over background music and simultaneous separate streams.
04
Third-party triggers
Contact input and output allow interaction with fire panels and other systems.
Specifications
| Description | IP-based PoE ceiling speaker |
| Power output | 6W RMS (1kHz @ −3dB) |
| Built-in amplifier | 6W Class D |
| Network interface | 10 / 100 Mbps |
| Protocol | ARP, TCP/IP, UDP, ICMP and IGMP (group broadcast) |
| Audio format | MP3 / MP2 |
| Sampling rate / bit rate | 8k–48k / 8k–512kbps |
| Sensitivity | 92 dB / 1W / 1m |
| S/N ratio | ≥85 dB |
| THD | ≤0.1% |
| Frequency response | 100 Hz–18 kHz (±3 dB) |
| Connector | RJ45; DC input; contact in and contact out |
| Power input | PoE 802.3af or 802.3at, and DC 12V |
| Operating temperature | −30°C to +55°C |
| Dimensions | Ø199 × 95 mm deep |
| Cut-out size | 166 mm |
| Weight | 0.9 kg |
All figures are nominal, per manufacturer data.
Applications