4-in/4-out network DSP power amplifier — 1000W×4 @8Ω, Dante-ready, 4.3″ touchscreen.

SR-AMP-DSP41000 integrates a full DSP processing engine, a 4.3″ capacitive touchscreen, and flexible signal routing across Analog, AES3 and Dante network input with automatic backup switching. It drives constant-resistance 8Ω/4Ω or constant-voltage 100V/70V loads from the same chassis, with standard FIR automatic linear magnitude and phase correction for precise loudspeaker tuning, and real-time monitoring of power, current, voltage, temperature and impedance shown live on-screen.

Request a Quote ⇩ Download Datasheet (PDF)

4 CH

In / Out

1000W×4

@ 8Ω

1600W×4

@ 4Ω

105dB

SNR

4.3″

Touch Display

Features

Dante-ready with analog backup

Dante network audio input option with automatic Dante-Analog backup, plus AES3 digital input.

Built-in DSP with FIR tuning

Standard FIR automatic linear magnitude and phase correction for precise loudspeaker alignment.

Universal load support

Switchable 100V / 70V / 8Ω / 4Ω operation with free setting of power and voltage limits.

Full real-time monitoring

4.3″ colour touchscreen shows temperature, power, voltage, current and impedance live, per channel.

Specifications

Amplifier channels	4
Output power @ 8Ω	1000W × 4
Output power @ 4Ω	1600W × 4 (bridge 2×3200W)
100V output power	Bridge mode, 100V (2×max 1250W)
70V output power	70V (4×max 1225W)
Max. output voltage	89V
Max. output current	20A
Min. load per channel	4Ω
Input connector	4× XLR
Output connector	4× SpeakON, 4× binding post
Max. input level	20dBu / 7.75V
Sensitivity	12dBu / 6dBu / 0dBu (selectable gain)
SNR	105dB @ 12dBu, 1kHz
Frequency response	20Hz–20kHz (±0.5dB) @ 1W, 8Ω
THD+N	<1% @ 1W, 8Ω
Sampling	48kHz / 24-bit
Dante (option)	4 input channels
Display	4.3″ IPS touchscreen
PC control software	Mconsole
Power requirement	AC 180–264V, 50/60Hz
Net weight / dimensions	12.35kg, 485 × 460 × 90mm
Gross weight / packing	16.4kg, 590 × 585 × 165mm